Hk-audio LUCAS NANO 600 User Manual download pdf (Page 4)

Lucas Nano 600 1.0

1 General Information

1.1 Unpacking and Inventorying

Remove all the component parts of LUCAS NANO 600 from the carton

and make sure you have received all items.

LUCAS NANO 600 consists of a subwoofer and two satellites.

Aprotective cover and a mains cable are also included.

1.2 Unfastening Transport Latches

Latches secure the LUCAS NANO 600 satellites to the subwoofer to

protect them during transport. Here’s how to undo them:

• Set the subwoofer with front of the speaker facing down and turn the

locking knobs on both sides rearward to unlock the satellites. Remove

the two LUCAS NANO 600 satellites from their cradle.

• Always make sure these knobs engage to lock the speakers down for

transport.

1.3 Easy Click Connector

• This mechanical and electric coupler connects the modules.

• To release the Easy Click latch, hold the pair of satellites with their

back panels facing you so that you can read the inscription Push to

Release on the one satellite. Push this satellite forward and then lift

straight up to remove it.

• To secure the Easy Click latch, hold the satellite with the inscription

Push to Connect with the back facing you and the pole mount pointing

up so you can read this inscription. Hold the top satellite upright with

the pole mount facing up as you lower and insert it into the Easy Click

connector, and then push forward.

1.4 Pole Mount on the Subwoofer

This M20 internally threaded shaft on top of the subwoofer accepts a

speaker extension pole with a diameter of 35 mm such as the optional

LUCAS NANO 600 MONO STAND ADD-ON.

1.5 Pole Mount on the Satellites

This 3/8" internally threaded shaft on LUCAS NANO 600 satellites

serves to mount the satellites to poles, tripods and microphone stands

with an externally threaded 3/8" tip.

1 2 3 4 5 6 7 8 9 ... 63 64

No comments

Hk-audio LUCAS NANO 600 User Manual Page 4