Hk-audio LUCAS SMART User Manual download pdf (Page 6)

L.U.C.A.S SMART Manual 1.0

1 L.U.C.A.S SMART’s

Control Features

1 Gain Mic

Twist this knob to adjust the microphone level.

Note: You can adjust the microphone and line or

auxiliary inputs separately and mix them as desired.

2 Gain Line

This knob adjusts power amp gain to match input

signal levels. In the event that distortion becomes

audible, the incoming signal level is too high. Simply

back off this knob.

3 Gain Aux

This knob adjusts power amp gain to match input

signal levels. In the event that distortion becomes

audible, the incoming signal level is too high. Simply

back off this knob.

4 Limiter Status LEDs

These dual-color LEDs indicate the operating status

of the multi-band limiter. Green = incoming signal,

limiters inactive; yellow = limiter occasionally activa-

ted; red = limiters operating continuously.

5 Mode

If you have just a mono signal available, patch it to

the left input of the Line In or Aux In circuits. Set the

Mode switch to Mono. When you do this, the system

outputs the monaural input signal on both sides

(the left and right).

6 Balance

Use this knob to adjust the relative levels of the left

and right channels.

7 Subwoofer Level

Use this knob to adjust the relative volume of the

subwoofer.

8 Power On LED

This LED lights up when the system is plugged into

a mains power supply and the Power switch (see

rear panel) is set to On.

9 Ground

Ground lift switch for separating the signal and

chassis ground when you encounter problems with

humming noises. The ground circuit is severed when

you press the button in.

Caution: Never tape over the plug’s ground terminal

– this endangers lives!

10 Mic In

You may plug a microphone directly into this elec-

tronically balanced XLR input. (pin 1= ground, 2= +,

3= -).

11 Line In Left/Right

This electronically balanced XLR input is designed

to take mixer signals (pin 1= ground, 2= +, 3= -).

You can also use cables equipped with 1/4" TRS (stereo-

style) plugs (tip = +, ring = -, shield = ground).

12 Aux In

RCA connector designed to take external signal

sources such as (DJ) mixing consoles and CD players.

13 Mix Out

Master output for patching Line, Aux In and Mic In

signals through to other devices such as tape decks

and MD recorders or another L.U.C.A.S SMART

system.

14 To Satellite Left/Right

Connect these Speakon

outputs to L.U.C.A.S

SMART’s satellite speakers.

15 Fuse

Mains fuse. In the event of a malfunction, this fuse

will blow, severing the connection between

L.U.C.A.S SMART and the mains power supply in

order to protect the system from harm. Replace only

with another fuse of the same type and rating as

specified.

16 Mains Input

Use the factory-included power cord to connect this

socket to a mains outlet.

3 4 5 6 7 8 9

10 11 12 13

1516 17

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments

Hk-audio LUCAS SMART User Manual Page 6

Comments to this Manuals

Related products and manuals for Acoustics Hk-audio LUCAS SMART